flexible hose AISI 304 SS wire braided with inner tube from EPDM rubber used for the connection between the water and the sanitary fittings also the installation temperature-5’c- +90’c with working pressure 10 bar, flow rate AT 3 bar 29 Lit/min and minimum bending radius is 30 mm height. five years warranty and perfect package.
Slip joint (SJ) end threads onto most 1/2″ IPS faucet connections, then just choose your angle/straight stop size and length
Constructed with a durable braided stainless steel outer sheathing with tough nylon reinforced vinyl tubing inside
- Available in various lengths & sizes for multiple configurations
- 125 psi maximum pressure rating
- 40-150 °F working temperature, intermittent to 180 °F
- NSF 61 certified & UPC certified
DN 6
These quality braided stainless water flex lines are the perfect choice for hooking up a faucet to your water supply. With multiple fittings to choose from, you are sure to find the right flex for your needs. Flexible supply tubes come in a few different sizes and lengths. Size refers to the diameter of the fitting at each end of the tubing. Connections for shutoff valves and fixtures typically are 1/4-, 3/8-, or 1/2-inch. Supply tubes may have the same or different sizes on the same tube as well as either male or female connections. Supply tubes also come in several different materials with different performance characteristics.
- In one plastic bag 10 (ten) pieces of flexible hose.
- In one carton bag 200 (two hundred ) pieces
